Size of 4 carb bolts

[MN_Bobber]

Folks,

Can anyone provide the size of the 4 bolts that hold the carbs to the intake? Are they a standard bolt that I should be able to get at a local HW store?

Thanks!

 

[MN_Bobber]

Answer found on you tube......5mm allen head bolts

 

[5twins]

Well, that's only a partial answer. They take a 5mm sized Allen key to remove/install but the bolts are actually an M6 (6mm diameter) by 20mm long. Buy an M5 bolt and it will be too small for the hole.

 

[bluebikerblan]

Damn 5twins....I was just going to pipe in with a "that turns out to be a tough place to use an Allen key".... and recommend an M6 hex head instead. Pure opinion

 

[XSLeo]

I thought a clamp held the carbs to the intakes, and the bolts held the intakes to the head.