Hey guys I'm having a little problem. Well I just welded on my hardtail. Before that I unbolted all of the electrical components from the battery box, zip tied them together, and moved them out of the way so I could cut and weld. I just moved them back into place to put them into the fake oil tank, but now I'm getting no spark. The actual starter button on the handlebars isn't working either. I went down the line and checked every fuse and connection to make sure nothing burnt out or came unplugged, and nothing seems wrong. I know at least 2 of the pieces that were bolted to the battery box need grounded, so I held them to the frame and ran power to the power wire and straight to the starter wire. I had all of my lights and the motor was turning over, put I pulled one of the plugs and was still getting no spark. Anybody had a similar problem before or have any ideas? Anything will be appreciated, I'm excited to ride it. Thanks.