Swing arm pivot bolt length

[borjawil]

I am wondering the length of the pivot bolt for the xs650 1978. I swapped an fzr600 arm on one of my builds and the fzr pivot bolt is not the same length. I was told it was the same as the xs650, unless the person just meant diameter - which it is.

If they are not the same length i need a xs650 pivot bolt please!

 

[HooliganCycles]

I would check in the classified section....with everyone doing hard tails these days, someone would probably give you one for the cost of shipping

 

[fredintoon]

I am wondering the length of the pivot bolt for the xs650 1978. I swapped an fzr600 arm on one of my builds and the far pivot bolt is not the same length. I was told it was the same as the xs650, unless the person just meant diameter - which it is.
If they are not the same length i need a xs650 pivot bolt please!

Hi borjawil,
you say far pivot bolt which implies that there's also a near one. WTF?
The XS650 swingarm only has one pivot bolt, 16mm diameter thing that goes right through the frame with an M14 thread on one end and a D-shape head on t'other.
Don't get a stock bolt, the M14 end snaps off.
Get the full M16 threaded end bolt from MikesXS.

 

[borjawil]

That was meant to be FZR. Found someone with a pivot bolt. thanks.