-
Enjoy XS650.com? Consider making a donation to help support the site.
XS650.com receives a small share of sales from some links on this page, but direct donations have a much greater impact on keeping this site going.
Talk blinkers anyone?
- Thread starter Tony Harrell
- Start date
OK I'm pretty unclear as to what you have, how you're wiring it. and what the issue is??
Reread; and you are saying black is ground and orange is a running light? Then red is the turn signal bulb?
Do you have a diagram showing what the red orange and black wires do?
I'm assuming blinkers AND running lights?
Using LEDs and resisters is kinda like buying a rain coat then cutting slits in it for better ventilation.
That resister is two in one package? Blacks to ground one red to each side of the turn signal circuit?
I greatly prefer using an "LED" or HD flasher can that doesn't depend on the bulb(s) resistance to create the flash rate like the stock flasher does, rather than adding in load resisters....
Reread; and you are saying black is ground and orange is a running light? Then red is the turn signal bulb?
Do you have a diagram showing what the red orange and black wires do?
I'm assuming blinkers AND running lights?
Using LEDs and resisters is kinda like buying a rain coat then cutting slits in it for better ventilation.That resister is two in one package? Blacks to ground one red to each side of the turn signal circuit?
I greatly prefer using an "LED" or HD flasher can that doesn't depend on the bulb(s) resistance to create the flash rate like the stock flasher does, rather than adding in load resisters....
Similar threads
