Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Enjoy XS650.com?Consider making a donation to help support the site. XS650.com receives a small share of sales from some links on this page, but direct donations have a much greater impact on keeping this site going.
I cut the botton lip off first . then I ground down the spot welds. and was able to pry the mount up enough to finish with cutting and grinding. Just take Your time and You should be able not to hit the frame
I used the angle grinder. our best friend!
I did the drill method on the spot welds then a chisel and hammer. Two good whacks and they popped right off!! Fill divots from drilling with some weld and grind/sand down to taste. Good luck