I don't know what 123 did wrong and the thread was never finished. I have one installed and can perhaps answer questions or clarify the difficult to understand instructions.
First thing is the stator plate: carefully route pick-up wires behind the stator plate and ensure they don't get pinched - plate should not have a "squishy feel" and should press solidly against the engine case.
Second: loosen the mount screws and move the external pick-ups outward before attempting to install rotor (adjust to .4mm later).
First thing is the stator plate: carefully route pick-up wires behind the stator plate and ensure they don't get pinched - plate should not have a "squishy feel" and should press solidly against the engine case.
Second: loosen the mount screws and move the external pick-ups outward before attempting to install rotor (adjust to .4mm later).