trance
XS650 Addict
hey guys i have a 82 xs650
just finished redoing the top end - new cam chain, lapped the valves, new valve guide seals, new gaskets, etc.
I've cleaned the carbs and jetted with +2 sizes on the mains, +1 size on the pilots
the idle wanders. If I start and just let it idle, it'll be fine, but then if I rev it, it will go up to 2500, 3000, back down, up again, etc. this is with the throttle closed.
I've sync'd the carbs w/manometer, have the screws 3 turns out, floats are at 22mm.
Getting ready to go work on tuning again, I will readjust the valves, cam chain tension, but I think the problem is in the carbs.
any ideas
just finished redoing the top end - new cam chain, lapped the valves, new valve guide seals, new gaskets, etc.
I've cleaned the carbs and jetted with +2 sizes on the mains, +1 size on the pilots
the idle wanders. If I start and just let it idle, it'll be fine, but then if I rev it, it will go up to 2500, 3000, back down, up again, etc. this is with the throttle closed.
I've sync'd the carbs w/manometer, have the screws 3 turns out, floats are at 22mm.
Getting ready to go work on tuning again, I will readjust the valves, cam chain tension, but I think the problem is in the carbs.
any ideas