Wilkopotamus
Wilkopotamus
G'day All,
Hoping for some advice from the collective gurus out there!
I'm building a 74 TX650A Street Tracker and have installed a Pamco coil, running the ultimate coil and iridium plugs (Mikes XS). I have freshly rebuilt Carbs (BS34) and have not touched the timing or valve train.
The bike was running and starting beautifully, took it for a ride 5ks up the road it died as if it had run out of fuel - plenty of fuel, drained the battery trying to start it, refused to start under kicker. Pushed it home and found that it had no spark - replaced PAMCO ignition, now has great big fat spark, but I can't get it to start??? Have recently checked float height - adjusted it to 25mm. Carbies are clean and fuel is fairly new.
I'm racking my brain as it was idling and riding well before it stopped!
Cheers Josh
Hoping for some advice from the collective gurus out there!
I'm building a 74 TX650A Street Tracker and have installed a Pamco coil, running the ultimate coil and iridium plugs (Mikes XS). I have freshly rebuilt Carbs (BS34) and have not touched the timing or valve train.
The bike was running and starting beautifully, took it for a ride 5ks up the road it died as if it had run out of fuel - plenty of fuel, drained the battery trying to start it, refused to start under kicker. Pushed it home and found that it had no spark - replaced PAMCO ignition, now has great big fat spark, but I can't get it to start??? Have recently checked float height - adjusted it to 25mm. Carbies are clean and fuel is fairly new.
I'm racking my brain as it was idling and riding well before it stopped!
Cheers Josh