Media added by YAM277

Navigation

  1. XS650 Originals and Restorations 178
  2. XS650 Choppers 31
  3. XS650 Bobbers 126
  4. XS650 Trackers 163
  5. XS650 Cafe Racers 102
  6. XS650 Slightly Modified 147
Browse albums

Media comments

  • gggGary
    Jim's Paint
    Love Jim's painting!
  • Tim Meaders
    Spoiler
    This was my original one-off design, it was scrapped and replaced with a new wider version.
  • P
    Spoiler
    where can I get this spoiler

Most media items

  1. YAM277
    510

    YAM277

  2. TwoManyXS1Bs
    502

    TwoManyXS1Bs

  3. I am Carbon
    500

    I am Carbon

  4. Mike G
    472

    Mike G

  5. Mailman
    463

    Mailman

Media statistics

Categories
6
Albums
2,942
Uploaded media
25,481
Embedded media
18
Comments
1,628
Disk usage
4.6 GB
IMG 0809-Slide needle break down.

IMG 0809-Slide needle break down.

  • 0
  • 0
Turning grime into Glory!

Turning grime into Glory!

  • 0
  • 0
6CopperWashers. Here is the location choice I used. The other photo was very descriptive, just wasn't sure of having the 2 acorn nuts side by side, li

6CopperWashers. Here is the location choice I used. The other photo was very descriptive, just wasn't sure of having the 2 acorn nuts side by side, li

  • 0
  • 0
IMG 15- New bushing on the left, 11/32 drill bit used first, to start the opening, followed up by a 23/64 drill bit used second and the old bushing sh

IMG 15- New bushing on the left, 11/32 drill bit used first, to start the opening, followed up by a 23/64 drill bit used second and the old bushing sh

  • 0
  • 0
IMG 14- Light cleaning afterwards with a Dremel stainless steel brush.

IMG 14- Light cleaning afterwards with a Dremel stainless steel brush.

  • 0
  • 0
Time to split the chain!

Time to split the chain!

  • 0
  • 0
IMG_1391

IMG_1391

  • 0
  • 0
IMG_1401

IMG_1401

  • 0
  • 0
IMG 17- Close up of old bushing removed. Drill bit recommendations from Mike XS were spot on!

IMG 17- Close up of old bushing removed. Drill bit recommendations from Mike XS were spot on!

  • 0
  • 0
IMG 11B- Applying a light coat of grease to the surrounding area keeps shavings together, for an easier clean up.

IMG 11B- Applying a light coat of grease to the surrounding area keeps shavings together, for an easier clean up.

  • 0
  • 0
IMG 16- Top view shows space behind sprocket, where it seats up against the bearing, no seals or washers, just metal to metal.

IMG 16- Top view shows space behind sprocket, where it seats up against the bearing, no seals or washers, just metal to metal.

  • 0
  • 0
IMG_1407

IMG_1407

  • 0
  • 0
Classic Lines

Classic Lines

  • 0
  • 0
XS 650

XS 650

  • 0
  • 0
IMG 12A- Amazed to see the old bushing attach itself to the secondary bit used (23/64 bit)

IMG 12A- Amazed to see the old bushing attach itself to the secondary bit used (23/64 bit)

  • 0
  • 0
Hey! it was the eighties! Flames were in!

Hey! it was the eighties! Flames were in!

  • 0
  • 0
IMG_1408

IMG_1408

  • 0
  • 0
IMG_1394

IMG_1394

  • 0
  • 0
Top view, showing the rephase work, supplied by Hugh. One of the best experiences, in this rebuild!

Top view, showing the rephase work, supplied by Hugh. One of the best experiences, in this rebuild!

  • 0
  • 0
IMG 0736

IMG 0736

  • 0
  • 0
Breakin' it down!

Breakin' it down!

  • 0
  • 0
IMG 18- Note back of retaining nut has a recess, to help tightly seal against locking washer.

IMG 18- Note back of retaining nut has a recess, to help tightly seal against locking washer.

  • 0
  • 0
IMG 0778

IMG 0778

  • 0
  • 0
Ready to Toast!

Ready to Toast!

  • 0
  • 0
Back
Top