When I removed the starter, I installed this freeze plug (obtained from a local auto parts store) to block the hole. I tapped it in from the inside of
Yep...looks like glitter, but is actually small chips chewed off of the cam chain guide......NOT what you like to see in an engine! Also on the filter
When I tore into the engine, I found that the front guide for the cam chain had lost the plastic shoe and it had fallen down into the crank case, allo
When I replaced the little cover that goes over the part of the tranny where the electric starter gears are (were), I used a couple of wire guide/clam
When I removed the starter, I installed this freeze plug (obtained from a local auto parts store) to block the hole. I tapped it in from the inside of
As part of the weight loss program, I removed all of this stuff. I figure that the kick start will do it and if it won't, I probably shouldn't be tryi
Top triple clamp was originally a sort of ugly flat black, so I blasted all that off, did a little sanding and then coated it with clear. Personally,
The frame and misc parts all done....you can see the rattle cans we used to do the paint. I had a local automotive paint shop (Barrett's) here in Reno
D

When I removed the starter, I installed this freeze plug (obtained from a local auto parts store) to block the hole. I tapped it in from the inside of

There are no comments to display.

Media information

Album
Winter XS650 Street Tracker Project process
Added by
dondlhmn
Date added
View count
449
Comment count
0
Rating
0.00 star(s) 0 ratings

Share this media

Back
Top