Recent content by badassjamie

That's cute. But clearly they wont win and daily begging isn't going to help. It's the FB general population who will decide the winner

Look, I never said anything directed at any person specifically, and I also did not mean to get anyone up in arms. That said, I've noticed a few things amongst the 650 bike set that have really started to irk me. It's not the usual "is my pamco hooked up right?" or "what hardtail should I get"...

Artist? are you fucking kidding me. I don't want to sound insensitive, but there are way too many autistic kids on here cobbling together death traps, and I ain't seeing any new artwork. Sorry, I've been hitting the white out pretty hard today but I like how my posts were deleted because I...

what, no Twitter? For that reason I'm out.

Yes, I'm looking at the pin of course

I was going to do that, but I want to know if the cam is just out 180 with the pistons at the bottom. As in Bottom dead center!? The PMA was already in but I had the Pamco wired to the green coils and battery just to hear it run. I had known good carbs and every variable was perfect but the...

It has a PMA and is not marked for TDC. When the Cam notch is pointing straight up, the pistons are as low as they will go. If I can't depend on the PMA to indicate TDC then I needed to look for the notch in the cam, which didn't make sense because the pistons were at the bottom of the jugs...

This engine I got from a po wouldn't start despite good spark, fuel, and everything else looking fine and so upon further examination, I discovered the cam shaft slot when at TDC, the pistons were at the bottom of the stroke, or at the bottom of the case. I observed this by looking thru the...

Clearly you're better at wiring than you are grammar. And that thing doesn't even have fenders.

Just skimming thru this but, are you like the general contractor on these builds; as in, are are you actually building anything or you shop all the parts out to suppliers and have someone assemble them to your drawings and you direct the construct??

Those sprocket or skatewheel type chain tensioners, will they eliminate or reduce having to tighten the chain at the axle adjusters? I'm at the max chain travel on the axles and short of cutting a link out, I'm considering going the tensioner route anyway. Thanks

Looking for a complete clutch basket for a 1977. Need the whole thing in good, useable condition. Must be willing to ship to Alberta. Will paypal immediately. Many thanks for any tips, leads, or offers!

And how many of those so called "powder coats" are actually hi-temp rattle can.

Is there any way you could post some better pics?

I filed a Paypal complaint against them but there was no way to make it a dispute. The next day I got a email from them asking if I want my money back. They refunded it after over 10 weeks of waiting and claimed that my tail was going to be shipped out tomorrow....Bizzare business model that is...