Recent content by Jossw

Good to know! Thanks!:thumbsup:

Thanks XSLeo. The reason why I asked was that I was thinking the wheels may flex laterally under load quite a bit. Don't really want the caliper and wheel to meet haha:yikes:! Looks like i've got 2-3mm so I am thinking it'll be fine. Cheers! Joss

Hey Guys, What's the minimum clearance from brake caliper to cast wheel? Ducati 4 pot's. Thanks :thumbsup: Joss

I don't need brakes to look wierd :D Just bought dual ducati front calipers so want to use both if I can- use one front and one rear. Rear has to be right so leaves me with the left one for the front.

I thought it might but that's ok- i've got a digital speedo so not too worried. Thanks!

Hey guys, Anyone tried fitting a 300mm or 320mm rear disc to a 16" cast rear wheel? (my rear has the 267mm at the moment) Does it work? Just bought 2 front ducati brake calipers and thinking of using one on the rear so wondered if I could get a set of dual 300mm or 320mm disc's and use one...

Awesome- thanks guys I'll give it a go! Cheers, Joss

Hey guys, So my front brake is a right front brake. Any prob with just flipping the wheel 180 degree's so it becomes a left front brake? Right front on rear, left front on front?? Just thinking of buying two front calipers L and R and using one for the front, one for the back? Prob newer...

Thanks heaps XSLeo! Very much appreciated. If you ever need a bracket or whatever drawn up in Autocad for laser cutting/water jet cutting or whatever let me know!

Hey Guys, May seem like a dumb question :doh: but is there any difference between front and rear Fazer brakes? i.e can I buy the dual front brake setup and use one caliper and disc on the front, one caliper and disc on the rear??? Anyone done that or only bought single/dual front, single rear...

Hey Guys, I really need two measurements for where my final drive should be. I have no engine yet and my frame is in pieces. I am trying to build a new swingarm (the frame was a wrecked hardtail):banghead: so it has been cut off and I just need these two measurements. Please help me out...

Hey Guys, Can anyone help me out with the location of the Final Drive Sprocket? I just need the height from the bottom of the frame and the length from the back of the backbone. I don't have access to an engine right now and my frame is in pieces and trying to build a custom swingarm...

Hey Guys, I'm after the vertical height from the bottom of the frame to the centre of the final drive sprocket on the engine, and the horizontal height from the rear of the backbone to the centre of the final drive sprocket, and the distance out from the centreline. Basically I want to know...

Thanks gggGary I thought that was the case!

Is there any difference between the Maxim 650 ('82) and XS650 Frame ('79)? I have the opportunity to buy a Maxim Frame with title to replace my XS650 non-titled frame, Thanks guys!