Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Enjoy XS650.com?Consider making a donation to help support the site. XS650.com receives a small share of sales from some links on this page, but direct donations have a much greater impact on keeping this site going.
Where can this sprocket be bought and how much does it cost? I have seen the online Megacycle catalog but there are no prices and no apparent way to buy direct from Megacycle.
Thanks for your reply. Sounds like a good method. Measuring the valve to piston clearances from the impressed solder (or other material) and then seeing where they are compared to the standard measurement value should let me know which way to go for head and base gasket thickness.
I am now realizing my cylinders are stock in length. I had the cylinder head rebuilt a long time ago but I don't think it was milled to a great extent maybe just resurfaced. But I don't know how much cutting that would involve. The change being that it affects valve timing. I'm thinking...
Does anyone know how to do measurements and what the values should be on a 1974 TX650A to determine if the cylinders or heads have had any milling done to them. I am thinking the cylinder sleeves would need to be measured but I don't know their stock length. Or what the distance between the...
I need a side stand for a 1974 TX650A. It must be the same as the one in the diagram. One which accepts the rubber stopper. It seems to be the only one which works for my bike. I have one which is part No. 447-27311-06 but it's not sitting flat. I believe I need part No. 341-27311-01-00
Use this link for setting your ignition for initial starting. I hope you have the same kit number.
http://www.boyerbransden.com/pdf/KIT00303__BOX00210_.pdf
Let me put it this way and you should be able to come to an understanding of the system. Full advance can be set at various RPM's. Using a digital tachometer which works by counting firing off of a spark plug wire I could run the engine at precisely 3000 RPM then move the stator plate so that...
Those are instructions for the Micro Digital System. I have the Micro Power Ignition system. It's instructions can be found here http://www.boyerbransden.com/pdf/KIT00303__BOX00210_.pdf
I get the weight and horsepower from this link http://www.clink.net/Kevin/specs.htm
Wikipedia states...
When I used the word emperical I meant that a dynamometer would be used to set ignition timing so that best horsepower at the rear wheel would be achieved for each RPM range. And that's what I would assume the advantage would be of using an electronic ignition using a microprocessor is that the...