switches

I have a few other threads, but. I’m having an issue running: intermittent cylinder dying, switches sides, fresh battery. Has Pamco, single coil (Honda), have used diff coils to rule out. It was suggested to wire battery directly to coil to see if that works, which would indicate issue in...

On my 650D I just found a weird issue. Low beam works perfectly, but when switching to high beam, low beam stays on, however the light goes a bit dim. I guess due to the increased voltage drop when both filaments are drawing current. My dimmer switch seems to be a correct European 77 model, with...

Figured I'd start a thread on my build so far. Bike came from the 3rd owner I believe, so I tore it down rite away! Welded on a visual impact brat kit. Chose that particular kit, because I liked the lines/options for the rear. New seals in the forks. I haven't lowered it/yet. Once I get in...

I am in the process of planning out my hand controls for my Brat. I though those sexy momentary push buttons were sexy until the stupidity (use for signals) was pointed out. Using the clutch at the same time from a stop is not practical. So now I'm looking at MINI on/off/on toggle switches. So...

Hello everyone, I am attempting to get a head start on some work for the weekend. Looking to make a dent in a re-wire. I want to rule out and errors or wire color mis-matches when comparing the stock diagram, and the replacement switches I have lined up... Is there a chance anyone has...

A while back in a thread about brakes, 5Twins mentioned that Banggood had stainless brake lines in stock at a good price. I went on line saw the product, bought a couple which were delivered at no cost to my front door. If it is any test, they look like good quality items, although not yet...

I'm building a rat bike out of an 82 xs650s. The electric starter doesn't work and I need someone to walk me through the tests to sort it out. Here's what I have so far. It worked before I took the bike apart a few months ago. I changed the front end to 00 R1 sport bike forks but kept the...

Hey guys, So I'm about to build a custom wiring harness using the diagram that Phail sent my way (thanks Phail!) that I'm attaching. I'd also like to use the stock controls off my 79 2F. Problem is, I don't know what wires do what. I'm going to run a horn as well I think (haven't quite...

I'm just if anyone has made their own hand controls? I was thinking something like this: Any ideas on how to go about making something like this? Teebs? Thanks All A22 :thumbsup: