Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Enjoy XS650.com?Consider making a donation to help support the site. XS650.com receives a small share of sales from some links on this page, but direct donations have a much greater impact on keeping this site going.
I thought it might be worth looking into. More than six threads is supposed to be overkill, but I think that assumes normal metal... If it makes a difference.
One of the older threads here, somebody posts a link to a manufacturer of industrial chain guide plastic material. Member Purplezinger says he is retired from a shop that was making similar chain guides, and he will look into making some if somebody will send him an old one. But it was like nothing happened next.
The manufacturer in the link would probably be able to give good advice on how to attach their products.
It is, but I knew it would be awhile before I ran the engine. The instructions state to make sure you apply the coats every 10 minutes and that the entire paint job is completed in an hour or you have to wait 7 days before applying addition coats.