Replacement carb floats from a Mycarb, Indian copy of a Mikuni fitted to Indian built Royal Enfield.
At the price I thought I’d take a risk, so I ordered a pair and tried them in some Mikuni carbs I am working on and they fit.
BS34's or BS38's?View attachment 175072 i thought I would put this here just in case.
Replacement carb floats from a Mycarb, Indian copy of a Mikuni fitted to Indian built Royal Enfield.
At the price I thought I’d take a risk, so I ordered a pair and tried them in some Mikuni carbs I am working on and they fit.
Call me an ignoramus, but I’m not sure, the carbs I’m working on are from a Kawasaki KZ750 twin. Very similar to XS 650, the ones with the jets in the float bowl. The only difference I can see is the tangs on the cross piece are opposite way round.BS34's or BS38's?
This article says they're 38's.Call me an ignoramus, but I’m not sure, the carbs I’m working on are from a Kawasaki KZ750 twin. Very similar to XS 650, the ones with the jets in the float bowl. The only difference I can see is the tangs on the cross piece are opposite way round.
Thanks for the link. You are correct, looks like I have some more reading to do. Appreciated.This article says they're 38's.
I have fitted Cruzinimage floats in anXS500 I did recently, although not as accurate as Mikuni they worked fine.These guys sell them. They look to be a different shape to The RE floats.............2M did a write up on some cruzinimage floats for the XS650, a few years ago, and there were some problems with the manufacturing of the bar between the floats not being soldered on square. Could have been a bad batch, who knows
https://www.cruzinimage.net/2018/06/04/76-79-kawasaki-kz750-carb-floats-pin-carburetor-2-floats/