Smunroe134
XS650 Member
Looking for some help as I am stuck with this thing. In regards to the charging system, bike will not charge. Everything seems to be wired correctly. If I ground out the green wire for one of the brushes the “slap test” is very good but the bike will not rev up (sounds like it hits a rev limiter anything past an idle). When I disconnect the ground for the green wire the “slap test” is bad (no ground to one of the brushes) but the bike revs up just fine. I cannot for the life of me figure out what is causing this or why the bike will not charge. I’ve tried swapping the stators as well as the rotor. Ive also tried both of the regulators I have. Any help is appreciated. Bike is an 81 with electronic ignition.