Graeme1198
XS650 Enthusiast
Hi guys, have an issue which has me pretty stumped... had a look through the forum for some ideas but not found anything I’ve already tried.
I’ve been riding the bike with no issues and after a new cable install it just cuts out. Clutch in and in gear you can roll the bike forward when off with some slight resistance, clutch out engages the gear and the bike will not move obviously.
So here’s the specs:
1981
New clutch plates, correct torque jan 2020
New clutch cable adjusted top and left side casing today.
Re wired loom, side stand relay removed.
Neutral circuit seems correct. No grounding.
Any ideas on something I could have missed?
Odd as I’ve not had any issues until now
cheers
I’ve been riding the bike with no issues and after a new cable install it just cuts out. Clutch in and in gear you can roll the bike forward when off with some slight resistance, clutch out engages the gear and the bike will not move obviously.
So here’s the specs:
1981
New clutch plates, correct torque jan 2020
New clutch cable adjusted top and left side casing today.
Re wired loom, side stand relay removed.
Neutral circuit seems correct. No grounding.
Any ideas on something I could have missed?
Odd as I’ve not had any issues until now
cheers
