motorbreath
XS650 Addict
So, i was thinking the front axle on xs650 is 17mm=.687 in, and i want to switch it to hd 18in spoke wheel, so i figured i could switch out the 1in bearings on the hd wheel with 5/8in bearing and 5/8= .625in, then buy a 5/8 axle. does anybody think this would work, but i would put a thin sleeve in the axle holes to make a tighter fit. I dont know what im thinking, i was just wondering if this would work, instead of switching out the front end. Advice and sane thoughts welcome