Hey Pete
Side bar question???? Do you answer any PMs???? you have two from me and an answer would be nice, WTF?????????
Pete, just curious if there is a e-advancer in the pipeline for rephased set ups?
Installed Pamco E-advancer on a 1975 XS650B.. Bike Ran Well up to about 4000rpm.. Started missing back firing.. Checked Timing Good at 1000rpm ,
but NO Advance.. Checked every thing still No Advance... Got a Standard Pamco & re-installed ATU.. Bike Rides Great.. Will throw E-advancer into Dust Bin.
Trevor,Installed Pamco E-advancer on a 1975 XS650B.. Bike Ran Well up to about 4000rpm.. Started missing back firing.. Checked Timing Good at 1000rpm ,
but NO Advance.. Checked every thing still No Advance... Got a Standard Pamco & re-installed ATU.. Bike Rides Great.. Will throw E-advancer into Dust Bin.
A needed note here: that Mikes part # is NOT a PAMCO, Please spread the word that the MikesXS parts are no longer Pamco! If you want pamco; order from http://www.yamahaxs650.com/Pete
I got a Complete E-advancer Kit #200-2905 from Mikes.. Installed as per PAMCO website.. Included a 7.5Amp Fuse in Battery Feed to Coil/E-advancerBox.. Voltage 11.85-1.9...Changing at 14.1 Volts at 3500RPM.. The 3 Pins are there.. Idle Adjusted at 1000Rpm between the 2 fire Marks.. Bikes runs Greatup to about 3500rpm then backfires... Old type Timing Light used.. No Advance at All. Checked tricks I found in the XS650 Forum .. Still no Advance. So I ordered a New Standard PAMCO from XS650.com in September for US$79.95 which has a 60 degree Rotor.. Installed the Mech. Advance Unit , Timed between the 2 F marks at 1000rpm.. using same Timing Light on the L/H Lead... Advances as it should.. Have Ridden bike for over 500 miles with No Problems... I'm happy Now..
Thanks For the Support..
Well that is just sad to see. So much of the information they host is right from Pete's site (text and images). Now if the design itself has been ripped off. Suppose some PMA items suggest they don't mind that business approach.A needed note here: that Mikes part # is NOT a PAMCO, Please spread the word that the MikesXS parts are no longer Pamco! If you want pamco; order from http://www.yamahaxs650.com/