Engine caseing bolts torque settings

[Leslie]

Lads,
is there a set Yamaha torque setting for the engine caseing bolts M6, or do you use the bolt relative strength standard settings.

Leslie ???

 

[I am Carbon]

1.0 m-kg (7 ft-lb) should do it for 6mm bolts on the old xs

 

[5twins]

Yes, just the standard value for an M6 fastener - 5 to 8 ft/lbs. I don't like to use the max on any fastener going into alloy on these old bikes. I use 80 in/lbs for these case screws, for the sump filter plate too.