"I probably misstated earlier about power the coil. I believe what he did was bypass the harness and went straight to ground and coil. "
The spark happens only when the power is broken to the coil. If you supply power to the coil to continuously (with two wires) I think you run the risk of burning it out. (others with more experience may confirm). Depending on the sequence of events you may have ohmed out a good coil and then burned it out by running seperate wires.
The spark happens only when the power is broken to the coil. If you supply power to the coil to continuously (with two wires) I think you run the risk of burning it out. (others with more experience may confirm). Depending on the sequence of events you may have ohmed out a good coil and then burned it out by running seperate wires.