Last step to completion

[Vigilante]

So I am wiring up the bike using this diagram:

http://www.amckayltd.com/simplifiedwiring.jpg

Except my reg/rec has an extra dreen wire. I read that it is a ground wire but all that would mean is there is two negative wires? Can someone help? It's model number SH232-12

 

[Vigilante]

Another question, how did you guys do your lights? I can't find a switch that will allow me to turn the lights on and off and between high beam and low beam. Did you just wire the low beam to the off position and the high beams to on? Cause that's the only thing I can think of

 

[weekendrider]

This thread may help.

 

[fredintoon]

Another question, how did you guys do your lights? I can't find a switch that will allow me to turn the lights on and off and between high beam and low beam. Did you just wire the low beam to the off position and the high beams to on? Cause that's the only thing I can think of

Hi Vigilante,
if you are wiring to the diagram in post #1, it does show an on/off/on switch operating the headlight and yeah, I'll bet those are hard to find.
But it ain't needed.
Run the headlight with a plain ol' dipswitch you can buy anywhere.
The headlight will light up when the engine starts, just like the tail light.