Looking for info on wiring harness

[Xs_ragu]

Hello all,
I am looking for info on my 12/78 xs650 frame swap
I have a rolling chasie but when it's time to lay the wiring harness on the hardtail I'm pretty lost. If any one has any info for a newbie I would appreciate it greatly.
Thanks guys

 

[fredintoon]

Hi Xs ragu,
not ON, how about IN? Running the wiring through the frame tubes makes a bike look really elegant.

 

[member3480]

You got two choices when working with a stock harness to a chop build.
You can cut up the stock harness and reuse the wire that you are going to run and that's a lot of time to figure out.
or you can just cut out the charging and ignition part and make up the rest LIGHTS/HORN/ETC
or third you could buy one of my chopper harnesses that I make up and be done.
I like when guys try to do it on there own because you learn and its time and some switches.
So either way I am here to help so if you are going for it tear the harness apart.
You got any questions I am at DADDYGCYCLES@YAHOO.COM email as many times as you want and I will answer all your questions.
Rich