wiring diagram

Hey guys! The XS650 rebuild and improvement continues. She's running well with new carbs and mechanically figured. Now I'm trying to figure out the wiring. The previous owner had everything disconnected from blinkers to gauge lights while he was trying to install an electronic sped/tach. I am...

I recently found a 1972 XS650 in the trash and I am currently rebuilding it. All that is left is the wiring (I am building a chopper so it will only have headlight and tail light with no other accessories. I am picking up circuit breakers and I was wondering if I should use 10amp or 15amp manual...

Newbie here. Is there a wiring diagram out there that has Hughes Hand Built PMA and ignition with capacitor and has all the fused connections with headlight, taillight, brake light switches and has a key that turns everything on and off? I’ve searched high and low on the forums and asked on fb...

I bought an EMGO 40-37600 ignition switch and need some information on what the 4 wires are for, since I do not have the factory plug to connect to and finding any kind of schematic is virtually impossible. There is a red, black, brown, and brown/white wire. Any help would be great. Thanks, Jimmy

Ok guys bare with me 3 guys know the basics about wiring. I have an xs650 with separate reg and rectifier. I have a 2 wire head light tail light points ignition and original stator and all that so basically original factory parts just the bike is converted into a bobber and its converted into a...

I'm new to the forum but have been reading threads for the last couple years. Finally got the chance to do an xs build myself after a friend with a garage sold me an '81 Special motor with an accompanying hard tail frame. I was stoked. I dug right in but due to work, rookie mistakes, and other...

Hello all, I am looking for info on my 12/78 xs650 frame swap I have a rolling chasie but when it's time to lay the wiring harness on the hardtail I'm pretty lost. If any one has any info for a newbie I would appreciate it greatly. Thanks guys

So I'm on the final steps of my winter project on my stock 1975 XS650B, and the engine starts fine, everything works, thanks to you guys. But I hit one final snag: the electrics. The headlight and horn don't work! I've disconnected and re-wired it five times and it's driving me nuts. In detail...

Extremely new to the xs 650 bobber... heres what i have 78 xs650, completely bobbed with springer seat. 2 wire headlight, and tail light. no turn signals. Speedo (no tach) tank under the seat holding wires, battery and relays toggle switch for power toggle switch for lights...

As per title, a friend of mine wired up my engine, and this is the diagram he made. Please let me know if it is OK? Going batteryless and kick only, running a Boyer ignition and Power box.

Anyone have a simple wiring diagram for 81 xs

Hello, I know there are tons of wiring diagrams on this site, but I have found none really specific to what I am running. The PO who wired the bike made a mess of things and almost impossible to follow. I have recently finished reassembling the bike and over the weekend wired the bike from...

Hi all, I wanted to try a visual approach that bridges XSLeo's 'What happens when you turn your key on' and the wiring diagrams that I see all over the site. I also want to use this to build my wiring diagram. One of my challenges is not understanding wiring fully, how things flow, etc. I...

Hey all ive looked all over the place and cant seem to find anything im looking for a wiring diagram with a pma and points and will be kick only. This is going to be a brat build and want it as simple as possible. No signals just headlight high/low, tail/brake light, horn(by law not choice) and...

I have installed the pamco. I have installed Hugh's PMA. PMA is hooked up to the Rectifier that came with Hugh's kit. I have the spark plugs hooked to the Dual output performance Ignition Coil fromm Mikesxs. I want to run the motor in the frame and I am pretty certain I want a battery...

This is a real shot in the dark here, but does anyone happen to have a simplified wiring diagram for a 79 2F that's got headlight, tail light, turn signals (without the self cancelling feature), no starter (kick only), pamco ignition and everything else stock (stock controls at the handlebars...