pa23driver
XS650 Addict
so apparently i failed to measure my stock exhaust headers correctly and i thought that the XS performance commando style megaphone muffler would fit without an adapter. Imagine my surprise when the mufflers designed to fit a 1.5 inch pipe wouldn't fit over my 1.57 inch headers.
so my question is what would be better.....
1) buying the reducer sleeve set from Mike's
or
2) grind out the weld holding the inner and outer walls together (the weld is in great shape) and put this exhaust adapter in between the two header pipes and clamp the muffler on the big end.
the adapter is 1.5" ID x 1.37" OD
so my question is what would be better.....
1) buying the reducer sleeve set from Mike's
or
2) grind out the weld holding the inner and outer walls together (the weld is in great shape) and put this exhaust adapter in between the two header pipes and clamp the muffler on the big end.
the adapter is 1.5" ID x 1.37" OD