Xs6502021
XS650 Addict
Hey guys I have a 81 xs650 kickstart. Have PMA, original points. But now replaced the regulator, capacitor, switched to mikexs ignition gen 2 and new dual output coil. I can't get this bike to start. Got it from craigslist dude lied and said it needed one thing. I can't find a wiring diagram to match this crapshow wiring. The kill switch has three wires: one is attached to the headlight, one to the taillight, one leads down to a 30amp fuse and then connects to the key ignition(acc) but nothing to coils.. The other switch connects to headlight and ground. The coils were connected to an orange wire that connects to a 30amp fuse that connects to the same spot (acc)of the key ignition. The positive from capacitor connects to the regulator, key ignition, and that's it. Then the negative capacitor is grounded, and attached to Killswitch and ignition. I don't know what the heck is going on here. The only wiring that's right is the new stuff I did, regulator to PMA and then ignition to coils. I'm debating on taking every wire off this bike and rewiring it from head to toe, but there's so many diagrams idk which one to use or go by .. but if someone has a suggestion first before I do that it's be so helpful! Thanks