Since i did the reverse head heat will probably be a problem to the engine, the idea was to put an oil cooler at the front engine bracket.
Tellme your thougts
-
Enjoy XS650.com? Consider making a donation to help support the site.
XS650.com receives a small share of sales from some links on this page, but direct donations have a much greater impact on keeping this site going.
Oil filter and oil cooler
- Thread starter Dave Sanz
- Start date
Since i did the reverse head heat will probably be a problem to the engine, the idea was to put an oil cooler at the front engine bracket.
Tellme your thougts
Don't like how the head nuts have been tapered at the head washer.........The load should be spread as much as possable.
On the oil cooler........get an XS850/750 cooler and adapt the fittings. Can be got cheep.
XS850.... https://www.ebay.com.au/sch/i.html?...at=0&LH_TitleDesc=0&_sop=1&rt=nc&LH_PrefLoc=2
Here is one fitted.....Don't take any notice how this is plumbed, has been plumbed for the head only........
just make sure the inlet and outlet face up. if not the oil drains out and the cooler has to fill before it is sent through the engine
Scroll down to the bottom of post #2 for pics
http://www.xs650.com/threads/a-collection-of-xsjohns-mods.2426/
On the oil cooler........get an XS850/750 cooler and adapt the fittings. Can be got cheep.
XS850.... https://www.ebay.com.au/sch/i.html?...at=0&LH_TitleDesc=0&_sop=1&rt=nc&LH_PrefLoc=2
Here is one fitted.....Don't take any notice how this is plumbed, has been plumbed for the head only........
just make sure the inlet and outlet face up. if not the oil drains out and the cooler has to fill before it is sent through the engine
Scroll down to the bottom of post #2 for pics
http://www.xs650.com/threads/a-collection-of-xsjohns-mods.2426/
