pamco vs boyer 1 kick or 2?

[doctavee]

looking for advice on either upgrading from my current boyer to a pamco.my current setup starts 2nd kick everytime with nothing but an bat pac capacitor, led tail light with a toggle for my headlight and a hhb pma. I've been told that the only solution to get it to start 1st kick would be to use a boyer, any second thoughts? mind you ive tried to run the sparx capacitor and nothing seemed to changed...

 

[rybeatty]

Is one less kick worth the money and work of changing things over?

 

[Paulrxs650]

Realistically, I'd doubt you're going to find a first kick start from any ignition system. The engine normally needs a kicked revolution to get a charge of air/fuel into the bores, especially from cold.

If you have a bike starting on the second kick - give yourself a pat on the back and enjoy riding

 

[doctavee]

When ran with a battery it'll start first kick. Hhb said that if I bought the pamco setup it'd start first kick, was just trying to get a second opinion

 

[figure8]

It'll only cost you $200 plus to find out, as said a primer kick is usually needed when cold.

 

[TwoManyXS1Bs]

I thought I read a post from Pete, coupla years ago, saying his Pamco unit needed at least 1 revolution so it could orient itself...