Rear disc conversion

[Jfraser06]

im looking to do a rear disc brake conversion. I would like to see how people mounted their rear brake master cylinder. Just to get any idea.

 

[Jim]

PM @FB71 . He's either done one or in the process of doing one.

 

[Ratranger]

Here's mine. The master is off a husqvarna, welded bungs to the frame, turned a pivot pin, and modified the stock brake lever.

 

[Jfraser06]

Here's mine. The master is off a husqvarna, welded bungs to the frame, turned a pivot pin, and modified the stock brake lever.

That seems pretty clean, you wanna show me a picture of your bike? Your running an aluminum swing arm?? What swing arm?!?! I’m looking for one, or to convert it to an aluminum one

 

[Ratranger]

Swimgarm is from an fzr400rr 3tj, rear hub is kz750b with spacers on the rotor and sprocket to line up.

 

[Jfraser06]

Swimgarm is from an fzr400rr 3tj, rear hub is kz750b with spacers on the rotor and sprocket to line up.

Sweet looking bike man!!

 

[halfmile]

This is a $10 chinky MC from eBait. Uses a modified xs pivot.

 

[MaxPete]

Very very nice work gents!

 

[Signal]

Here is the one on my tracker.

Yamaha XT 600 (I think) master and slave, swing arm is Kawasaki.

 

[FB71]

in progress. I'm using all stock XS650 parts. I cut the tabs and mounts off a donor frame and welded them onto my frame.