Dethica
XS650 New Member
I bought a used 2008 suzuki s40. I've done very simple things to clean the bike up so far such as removing the indicators, the badges, the front fender, and the belt guard. I want to remove the rear fender and add a solo seat but am not sure what exactly I need to mount the seat. The rear bolts seem to be 5 inches apart and most seats have the rear bolts set at 7 inches.
There is another post on here similar to what I'd like to do aesthetically.
http://www.xs650.com/forum/showthread.php?t=21990
I would like to remove the rear fender and add the solo seat next. I'm just not sure exactly how to go about ordering a seat. I've seen things such as: Ryca's Bolt-On Solo Seat Hinge Mount, their Solo Seat Hinge Pivot, Seat Spring Mounts, Seat Springs and other parts from Ryca's website.
I know this isn't an xs650 but was hoping someone out there might have some knowledge on these things. Thanks in advance.
There is another post on here similar to what I'd like to do aesthetically.
http://www.xs650.com/forum/showthread.php?t=21990
I would like to remove the rear fender and add the solo seat next. I'm just not sure exactly how to go about ordering a seat. I've seen things such as: Ryca's Bolt-On Solo Seat Hinge Mount, their Solo Seat Hinge Pivot, Seat Spring Mounts, Seat Springs and other parts from Ryca's website.
I know this isn't an xs650 but was hoping someone out there might have some knowledge on these things. Thanks in advance.