80650xs
XS650 Enthusiast
as the title suggests, my turn signals are not working. bulbs and grounds are all good. brand new battery. 1980 xs650.
now I've been running around the bike with the test light this morning and here is what I have so far.
- key on and turn signal switch pushed to the left, turn indicator light on dash is illuminated
- starting at the rear, I have 12v of power at the green plug, and at the light. if I jump 12v to the turn signal wire it lights up, but no flash.
- at the front left, I have no power at the green plug. 12v jumped and the bulb illuminates.
-- On the right side, I have no power at the front or rear brown connectors, and the dash light is not illuminated.
I have searched and saw the auto canceling unit could be the culprit, but I must be looking in the wrong place or my bike doesn't have one. potential broken solder joint within the switch?
Except for someone removing the blinkers at some point, the bike is untouched and there is no botched wiring.
now I've been running around the bike with the test light this morning and here is what I have so far.
- key on and turn signal switch pushed to the left, turn indicator light on dash is illuminated
- starting at the rear, I have 12v of power at the green plug, and at the light. if I jump 12v to the turn signal wire it lights up, but no flash.
- at the front left, I have no power at the green plug. 12v jumped and the bulb illuminates.
-- On the right side, I have no power at the front or rear brown connectors, and the dash light is not illuminated.
I have searched and saw the auto canceling unit could be the culprit, but I must be looking in the wrong place or my bike doesn't have one. potential broken solder joint within the switch?
Except for someone removing the blinkers at some point, the bike is untouched and there is no botched wiring.