sleddog83

I should also add... I advise against splicing in New wire on cables carrying a lot of current. These splices will be prone to future...

What year/model? Try a company called Cycle Terminal. Those are Sumitomo .250 connectors. At least that's what they are on my 83...

I think modifying the kickstand happens with all the models for a variety of reasons. I replaced the "modified" kickstand on my 83 bike...

Replaced the sidestand. Way too much play with the old one.. probably about 3/4 inch play. Put a new one from Mike's on today. Play...

How much original wiring was left on the bike?

I would say that the ground is connected to ground bus, but since you don't have a harness on the bike, then I don't know? The wire...

Based on your description...yes. It switches to ground when in neutral.

On the SJ and SK models, the left and right blinking voltage go to the flasher indicator in the Pilot box. One signal drives one side...

If you put in led signal lights, you will need a blinker unit appropriate for led lights as well as some possible changes to wiring.

So where were these melted wires? Are there components connected the melted wires that need to be checked or replaced. I assume this...

You mention some wires that were brittle and corroded. How old was that installation of the pma? Normally it would take many years...