Max Midnight's latest activity

The attached will help. You have a US market XJ650G that is either New Yamaha Black or Frost Silver

Our store recently ran out of cooking oil. They had made an announcement that due to potential shortages they were limiting customers to...

Obviously his pre-cubism era.

Pure guess work but as Jim suggests going over pipework to tighten or loosen the gland nut. The alternative would be to use an...

The problem with anything like this is that you won't know what the problems are until you do it. Signal has identified an issue unless...

In my old line of business (Motor manufacturer aftersales) when a parts department said 'It still hasn't come in yet' that would often...

I must admit I find it strange that you wouldn't want to try and get to the bottom as to why the wrong spring rates were supplied. If...

Did you give the data directly to Hagon or was this through your supplier? I would be inclined to contact Hagon and ask them to explain...

As the indicator bulbs have a feed and earth wires you can discount the mounting points. I would check the earths and also the...

Want to carry more than a pillion? You need a Bohmerland...

I've had hip and knee replacement so I understand that going for the operation can be a big and difficult decision. Before writing a...

If it has back seats then it would save having to climb over the front ones...:unsure:

Reasons why batteries catch fire

Many, many years ago I lost a circlip in the engine of my BSA Bantam. What could go wrong I thought. I soon found out when it came up...

IMO it would be neater to weld a nut on rather than build up with weld...not that anyone will be looking that close.

And this years award for the world's ugliest bike goes to....

I would have thought that the really smart thing to would be to use the excess to (say) produce green hydrogen rather than waste it?

Another trick will be to be able to get the same range out of the battery regardless of ambient temperature. There is a drop of some...

If it was a toss up between a home paint job (rattle cans?) or PC then I'd go for PC. Refitting parts to the frame wasn't an issue and...

I have had my frame PC'd and painted. The issues I had with PC was that it didn't seem particularly durable, was difficult to retouch...

...and the weight! 😧 What you said plus development costs, low production volumes, setting up distribution networks, advertising...

...and the weight! 😵‍💫

I would be inclined to drill the mounting tab and insert a bush. Put in 10mm i.d. into the search.

Two things I would check: i) The bolts aren't bottoming out thus preventing a good seal (and may explain the extra washer which gives...

Here in the UK (and I would assume also in the US) there are companies that will make hoses to your specification. Suggest you search...

The bolt is still available in europe, part # 9010910268, for €9.00 ($9.85) so an alternative may be to search locally if you can't...