Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Enjoy XS650.com?Consider making a donation to help support the site. XS650.com receives a small share of sales from some links on this page, but direct donations have a much greater impact on keeping this site going.
Seats!!.. haha. Thought I'd actually said but obviously not. Links and info below...
Item no: 331589977904
They're a seat manufacturer from Hong Kong and very cheap.
Hi fellas,
Has anyone had experience with an eBay seller called City of Collectibles? Mines a 1980 XS650, and the frame is standard with back hoop. Do they fit well? And are there many mods needed for them to bolt on?
Any help is greatly appreciated.
Ta
Will
wasn't sure if I'd end up reusing mine at the time of stripping it down and the prospect of shoving all that wire back inside the headlight bowl I couldn't bear to think about. This loom is simple as!
I've finished just about everything else on my rebuild but left the scariest bit to the end like a lot of people - so on with the wiring. Going with a Boyer Bransden, kick only and a decent small battery. I did the boyer and coils fairly easily, got as far as connecting the ignition switch to my...
Thanks XSLeo, just realised on looking at my thread how stupid my question about the oil pump is :wtf: Because my engine is at the garage and i'm cleaning the casings i've not thought, but there i go making excuses for my numbnuts question.
On the point about the wire wrapped around the spark...
I can't find anything on t'interweb regarding deleting the Tach cable and not sure if I'm going down the wrong road with this but...
...I've bought a new digital speedo with RPM and tacho etc, to replace the old setup and have a Universal speedo adapter to convert to digital, but have been...
Cheers mate! Feeling better about going the YBR route now.
Just wondering thought, say if the banjo is bigger on the master cylinder side and i'm still the 10mm banjo size at the caliper end, will i be in trouble then or do i need to change the caliper too?
Will.
Been a while but i'm back with a related issue.
The stock systems all seem to have the tilted reservoirs and seeing as i'm going with flat bars, they wont do. So i thought how about something new and modern... What about a YBR 125 replacement?? They go with the 7/8 bar and are suitable for a...