Search results

What is your bottom price, with shipping? Thanks

I need a Stator Rotor for this 79 2F points ignition bike. You got a good one?

Hey- Looking for an charging Rotor assembly. My rotor is D to the EA D. I have a 1979 2F, points ignition.

Do you still have the charging Rotor? Just discovered this one is completely dead.

Well said Jonb- Gary, what would cause a Alt Rotor to just fail? I get no registering of resistance across the slip rings at all. Nor from each ring to ground. No damage has happened on that part of the bike and it looks to be in great shape. But she's an empty Rotor. What would cause...

Here is the response from ElectroSport about the lack of the ground on the Regulator terminal. Also his answer to testing their unit. That extra regulator ground is not used on our part. All grounding with the esr350 goes through the rectifiers ground wire now. Testing for their unit. We...

Thanks Leo- I know I could've fixed it, but this bike is a minimized Street Tracker and the Reg/Rec unit helped with that. When testing the Rectifier there was no reading at all on any of the posts. They wouldn't even register on the meter. I think that someone had jump started the bike...

I was wondering if this new Solid State unit needed to be grounded by mounting. I've sent an email inquiry to the manufacturer. They advertise the unit as a plug-N-play unit. They didn't send any instructions with it at all nor state anywhere that it needs to be ground mounted. Couldn't it...

Question, I bought an ElectroSport Rec/Reg plug in unit for this 79 2F(with points). The OEM rectifier was done. MY QUESTION, this ElectroSport solid state only has two wires on the Regulator plug, there's no Black(ground). No instructions came with the unit. Has anyone used one of these...

Is the 5.5" from the end of the plastic cone or cap seat?

So, got the newer set of "matching" slides. Did all the set-up pre synching routine. Bike does run better. But still have that annoying missing in the power band. Seems to almost go away after 30 minutes of riding. Suspecting coils. I checked the point gaps and if points were arching to...

I watched that one. I mean the whole build. Don't be holding out on us. Show it off.:thumbsup:

After taking out the sump filter to fix some seepage around the plate, I noticed the pushed in screen area you some of you guys were talking about. Now, I live in Sunny Los Angeles, can't imagine what damage colder area cold starts do to screens if it happens here in this warm climate. So...

Great idea. Don't have that much travel, nor chain length. You got footage of your project progression?

Guys, please do not think I'm not grateful. retiredgentleman, please don't take offense. I was just wonder why no one had(or have) developed a filter made exactly like the stock filter but with a paper element in place of the brass mesh. I've seen Mike's XS adapter unit. I was just...

Not a larger adapted paper filter, a copy of the OEM filters but with paper, not metal mesh.

Anyone have any idea why no one has designed a paper filter to replace the OEM one on the clutch side? Seems making one that mimics the OEM but with paper screen would be damn good. No?

Received the ElectroSport Rectifier/Regulator combo and the guys at Ballistic batteries replaced their 8 cell battery that failed for free. All plugged in. Bike runs ok. Now it's about tuning the PWKs. Found out that the two slides in the carb set were different in a couple ways. Waiting...

Huh? How are you thinking of channeling and mounting a skateboard wheel around the Swingarm pivot journal? Interested.

Hey guys, what about something already made by Yamaha that could be adapted? Don't need much, just protection around the Pivot Bolt joint and bearing seal. Having the same issue on my buddy's bike I'm working on. He had the 19" rear wheel adaption kit on and longer Hagon shocks. Then he put...