Search results

I will have to wait until the tcbros regulator comes in and go from there. Thank you for all the help!

After looking back I found that the regulator must have come with the bike as I did not purchase one from mikes. I do have a new regulator on order from tcbros part number 108-0007 which states it’s for an electronic ignition bike. Is 11.46v not a good reading? Should I be getting something...

Jpdevol, just went thru all the wiring from one of the diagrams you attached. Double checked everything. Started the bike and it revs up like it should. With the bike running the battery sits at about 11.46v. After reading many forums I’ve learned that the rectifier/regulator will switch on the...

Thanks for the quick response. Wiring harness is chopped down to bare minimum due to this being a bobber build. Rotor is from mikesxs (slip rings continuity reads 5.3ohms off bike). Stator is also from mikesxs (phase wires read 1.0 ohms between all 3 white wires). One regulator is a mikesxs and...

Looking for some help as I am stuck with this thing. In regards to the charging system, bike will not charge. Everything seems to be wired correctly. If I ground out the green wire for one of the brushes the “slap test” is very good but the bike will not rev up (sounds like it hits a rev limiter...