Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Enjoy XS650.com?Consider making a donation to help support the site. XS650.com receives a small share of sales from some links on this page, but direct donations have a much greater impact on keeping this site going.
Been searching but looking for the best and quickest information to split the bottom case, change out the shifting drum and any other shifting issues that I have experienced. something is broke or worn out as i have messed with the star, ctutch adjustment, plates cable etc. Any ssisstane to...
I think I might've lost the "plug" (Haynes, pg. 35, part #17). Although the pictures in the manual suggest otherwise, can anyone tell me if this is how the "selector fork shaft" is supposed to sit or is it clearly missing the plug? Seems like it's in too far and needs the plug to sit properly...
Gday lads. My 75 xs has been in storage for about a year. 2 days ago I moved house and rode it to my new place, only about 15ks. It did this and one other short ride without an issue.
This morning I planned to ride to work. I started and warmed it up, but when I went to leave it wouldn't go...
I finally got my xs bobber project off the lift and on the ground. Took it around the block and brought it in to adjust clutch and clearance the fender /chain area. On the lift in neutral spinning the tire, I get a bad bearing sound every couple of rotations on the front sprocket. If I depress...
Can anyone help me with a gearbox question.
I have stripped my engine down and removed the clutch but don't really want to split the crankcases.
I have tried to change throught the gears and the action seems a bit stiff/clunky and I can only get through 3 or 4 positions on the gear selector...
I'm rebuilding my engine and have the bottom end opened up. Everything looks good so I'm ready to put it back together.
Looking at the shifting forks and the transmission gears, how do I tell if I have them lined up correctly? Do I just slide the gears around until they fit into the forks...