cra-z1

Holy Cow, glad I will be dead in 20 years or so.

I have omitted the locking tabs on several of my Z1900 bikes but use blue loctite on the nuts. I even have omitted the locking tab on...

Take it apart and clean it up. Add a touch of grease to the post.

I delivered my friends bikes back to him last week but today was the first nice day for testing. I constructed the Z1 from all used...

I just shipped a tank. Just under 16lbs 30x17x11 $22.00 UPS. Im happy

I will have to check that out

Wow you dont find them like that to often

I think it cost me $26.00 from Idaho to Mi by Fed Express. You gotta check frt cost. It's surprising Fed Ex has been much cheaper than...

I have used the guy in Washington maybe 14 years ago but haven't seen him on ebay and I thought he was in the Seattle area. I have also...

I'v done discs with a sander flap disc and it did break the glaze and worked fine. I dont think the price is out of line for how they...

I just got some discs I sent out to https://truedisk.net/ for resurfacing. His turn around is very quick and he does them correctly. If...

Very nice looking bike. You have added some very nice touches

On my GS1100GL I used Quicksilver outboard gear lube because I had it on hand for my boat. So does that mean I can ride the GS1100gl...

Ya the oil tank is what I was looking at I was young also when I started working on that bike (like 16)but it sure taught me a lot I...

Looks like a Santee frame? Here is another one I wish I still had? Wait! Did I just say that. maybe as a conversation piece.

Yes that would have been the one to keep for several reasons. I think my 73 z1 will be around for quite sometime

Not familiar with that model , however I was just starting junior high.

All for the price of $99. The paint job, after the bike was stolen from the base and dumped.

I'v posted this bike before but has to be my first Z1. Its was the bike that kept me from going crazy while stationed in San Diego in...

Looks very nice good job

Don't forget if you use a 256 crank with a 447 cam dont forget to change the sprocket or visa versa That should clear thing up!

Im lost!:shrug:

I may watch a You tube video to get the jest of what's going on but I always go back and study the darn thing with my own eyes and try...

O ya you defiantly need a manual and a few nights of just reading each section.

So are we Americans the only country where a lot of us (not me) have to rent storage space to keep all of our crap. It just amazes me...

Yes the Time Cert would need to sit flush. The counter sink used withTime Certs may not be the best idea. If I used the Time Cert I...

I would be looking at the Time Certs for professional looking job. Maybe Helicoil also. Nuts on the backside may work for Larry the...

Where is North 40 is this conversation. You guys do know the Bell and the state of California conspired to pass helmet legislation of...

I'v never laced a rim like the either but you need to do the inner spokes first which are the blue ones

I have 1 of the following 240,270,260,280,265,and (2) 250. I would not use the Kawi 29mm shims or grind them either. Hmm? $5.00 per shim...

I have 50 or so shims for the Z1 which measures 29mm (yamaha used the 29mm also) and a few from the Suzuki at 29.5. I had to buy several...

Dont buy a whole set just the ones you need. Check each one and record them first. You may be able to swap a few around saving the...

Also your starter, had to rebuild mine. With a new armature. Some people should not own bikes.