Thanks to everyone who waited, today, I spent several hours out in the garage, and dis-assembled everything, I mean I took it apart down to the frame, which by the way, if anyone is local to 44253, the untitled frame with swinger is free.
Next, I'm going to sort through the emails, see who was first on what, get some individual pictures of those parts to make sure they are in the condition you expect, I'll measure everything and weigh it for approx postage quotes as well.
even the harness was removed complete, I believe the only thing I seen wrong with the harness, is one ground wire from the headlight connector needs repaired, and a better job done on the stator loop bypass that someone did with house wire twist connectors. but otherwise, all connectors look good. engine complete is spoke for and the carbs are sold/gone, still have everything else from ignition box to handlebars, everything. Handlebar controls are trashed and not salvage-able, got it that way. A lot of items are rusty, but paint-able, and had paint on them in the first place, ex; chain guard, battery box, etc. someone was asking about the pegs(I'll figure out later) the 2 front, rubber torn but complete, the two rear are decent.
I'll try and get all the quotes going the next 2 days.
Thanks.
Rich