Last week i decided to polish up my carbs a little, so I figured i'd grab the spare carb tops and float bowls from the stache and clean them up so I could just swap them out on the carbies to save some time when I actually pull them to clean. Well the pilot jets were a little buggered up and I could not get them to budge with a screwdriver. I tried soaking in carb cleaner, followed by soaking in penetrating oil, and I even tried hitting them with the heat gun. Still nothing, and at this point the heads were good and boogered. Today I stopped and looked for a left hand drill bit but Rural King didn't have any, so i opted for a couple of easy outs. Long story short, I now have 2 bowls with snapped off easy outs in the pilots. Am I screwed here now? Anyone got a last ditch effort shot at removing these. I'm just glad this is the extra set from the parts stache and not the only ones i have.