http://www.yamahaxs650.dk/tips/Boyer/default.aspx
I followed this thoroughly
Last time I got it wrong i switched the 2 leads going to the magnetic pickup
those please check
http://www.yamahaxs650.dk/tips/Boyer/default.aspx
I followed this thoroughly
So your telling me that even though the white tracer and yellow tracer are labeled to go to one another, switch them? Because as it stand yellow is to yellow and white tracer is to white tracerLast time I got it wrong i switched the 2 leads going to the magnetic pickup
those please check
View attachment 200041
Did you mean the negative terminal of your coil?black; to my negative on my terinal
YesDid you mean the negative terminal of your coil?
So your telling me that even though the white tracer and yellow tracer are labeled to go to one another, switch them? Because as it stand yellow is to yellow and white tracer is to white tracer
No spark when grounded to the head or in the motor its not firing. When checking for where I got power it's all the way down to the coil.No if the colors match it is connected right please check upstream
As
View attachment 200043
Enclosing the instruction blue box there the wiring can be seen please check if the same
No spark as in nothing with the plug outside or no ignition ¨with plugs inside
No spark when grounded to the head or in the motor its not firing. When checking for where I got power it's all the way down to the coil.
This I can do. If the box is not getting 12v it will not spark ? CorrectHave you verified 12V at the coil pos. and the red wire on the Boyer?
I got 2 bullet connectors plugged into ignition lead(red white tracer) one goes to box one goes coilCorrect. That's main power to the whole system.
I got 2 bullet connectors plugged into ignition lead(red white tracer) one goes to box one goes coil
Here is what I got
It runs