Recent content by KeithB

It wasn't very clear in this manual and I don't think I have actually seen a B8ES. Good to know I have the right one installed now. thanks 5 :)

Thanks for the clarification Pete Bike is running great and the plugs are clean but I just wanted to be sure. My Haynes (not Clymer...DOH!) manual shows "B-8ES" then beside it shows "BP-7ES" (for C models) In the front page of the manual , it shows C models as '74-'77 so it left me to assume...

I have a 1980 XS650 Special and the Clymer manual seems to indicate a BP8ES spark plug. This is a non resistor type but NGK shows a replacement as a BPR8ES.(R is resistor type) Currently I'm running BP7ES with Mike's XS "high output" coil. I suspect the 7 is a bit on the hot side. What is the...

I use the Mike's Commando Style and it works well and sounds great! Priced quite reasonably.

Instead of working with resin, why try the gel that is used in the professional lighting industry? Lee and Rosco are the manufacturers and available in music stores and photo shops.

Noel, try what weekendrider suggests by unplugging the headlight and try the switch. Also, try what others suggest as well. If you need help, I am in Toronto.

I read the Minton Mods. Thanks for the link. Interesting info there but nothing on the drilling. It would be better to get all the info before drilling holes in my sliders. However, it looks like larger bore carbs would be useful on my 1980 Special.

I see on 650 Central there is a"650 Central Premium BS34 Jet Kit" It mentions a drill for for slide dampening modification This was something that came up in tuning the Hawk NT650 but I havn't seen anything pertaining to Mikuni 34s on the XS650. Anyone done any drilling to modify slides?

I too am looking for parts in Canada and find it odd that the US arm of Mikes has the parts and the Canadian distributor can't seem to find a "supplier" ??? Seems clear to me there is supply and demand. Evidently, the US distributor can seem to get the parts. How is it that parts can't be...

Too funny! Made my day :)

Thanks for the pic 5twins

I have a similar problem and will check for the damper washer. Is it supposed to go between the spring and adjuster sleeve?

You will stop short in life :) I just can't figure out people who go without a front brake. However. the choice is theirs to make.(not trolling...) I have 4 different bikes with brakes in perfect working order and none of them will stop anywhere near as fast on the rear brake as on the front.

$40 !?! There is a reason it's so cheap. Come on....just HAS to be a POS!

The 18 yr old driver"accidentally" didn't know the basics and executed a bad pass and the bike rider "accidentally"didn't have a helmet. :wtf: