That is really nice! I like that a lot, one of the better clutch holders I’ve seen!
“There is no pain you are receding
A distant ship smoke on the horizon
You are only coming through in waves“
Love Pink Floyd too!
-
Enjoy XS650.com? Consider making a donation to help support the site.
XS650.com receives a small share of sales from some links on this page, but direct donations have a much greater impact on keeping this site going.
What have you done to your XS today?
- Thread starter I am Carbon
- Start date
-
- Tags
- maintenance
That is really nice! I like that a lot, one of the better clutch holders I’ve seen!
“There is no pain you are receding
A distant ship smoke on the horizon
You are only coming through in waves“
Love Pink Floyd too!
We call it riding the gravy train.
Fawksey
XS650 Enthusiast
The manual says to do this every 3 months or 2500 miles. Anybody else do this?
Nah.
great looking Standard there Van Islander
scrapmetal
XS650 Addict
That's impressive.
scrapmetal
XS650 Addict
Tiesco
XS650 Addict
Damn! Do you know how much that barrel weighs when it's full of Hoss feed? 300 pounds! And I heard tell you were stealing Dilithium Crystals from the U.S.S. Enterprise, you prick! 
Somewhere there is a Delorian with some shit missing! I better not see a flux capacitor on that bike!
Somewhere there is a Delorian with some shit missing! I better not see a flux capacitor on that bike!
Tiesco
XS650 Addict
Damn! Do you know how much that barrel weighs when it's full of Hoss feed? 300 pounds! And I heard tell you were stealing Dilithium Crystals from the U.S.S. Enterprise, you prick!
Somewhere there is a Delorian with some shit missing! I better not see a flux capacitor on that bike!
I've made a few counterweights for tractors and loaders by filling them with concrete.
Yeah I've got sticky fingers. I always did.
Now are you an original series guy or next gen?
Both, my friend! ( But I got to tell you, I liked Silverado, Lone Ranger, Lonesome dove, but Avatar was over the top. Then Lost In Space. ( That Robot, I have two of them! Don't tell NO-body!)
I ordered me some carb holders for my BS38's, with the barb. I want to be able to just pull off a rubber cap and check the carbs.
I got my dwell dialed in and noticed the left carb had pulled most of the way out of the carb holder. Really! Ok, took off the air boxes and re-set the carb in the holder. Now what? The rubbers between the air boxes and rear of the carbs are cracked. About $32.00 bucks from Mike's Fun never stops.
I got my dwell dialed in and noticed the left carb had pulled most of the way out of the carb holder. Really! Ok, took off the air boxes and re-set the carb in the holder. Now what? The rubbers between the air boxes and rear of the carbs are cracked. About $32.00 bucks from Mike's Fun never stops.
