Search results

I have a millermatic 180 mig welder that i bought new 6 years ago. It has been a great machine until now, the shielding gas is always flowing when the welder is on. as soon as i turn on the welder you hear the click of the gas solenoid that you usually hear when you pull the trigger. If anybody...

Im gonna be running my own 2 into one intake and i know others are also. i really wanted to buy the carb from xs mikes thats already jetted for an xs with pod and open exhaust but for the time being he said he can only sell them as a set. so i was wondering if anybody else wanting to run a...

I i ordered some shinko 712's and when they got here the new 130/90/16 looks a lot smaller diameter than the original tire that only said mt90 16 on the side. 130/90/16 is the correct normal size isn't it?

i made my own custom pipes, put the exhaust flanges on then welded on my mounting points to the exhaust. I didn't think too far in advance because when it comes time to powder coat the pipes the flanges will be stuck dangling around on the pipes. Any body out there modify stock flanges to work...

i mounted the rear caliper "bar" and was wondering if you guys think this will work right. i cut the factory bar way down and welded it back together with a slug inside. i bent the ends to make it meet up with the frame tubes and cut the mount off the swing arm to use on my frame. i couldnt...

getting close to tire time for the bobber/chopper project. the rear tire im gonna go with the stock size but the front i was wondering if i can go bigger than the 100/90/19 to gain a tiny bit of ground clearance because the bike ended up a little lower than planned. i looked on a metric...

trying to figure out how to mount all of my factory rear disc brake parts "lever, resivoir, ect." on my hardtailed frame. anybody have close up shots of there setup?

i really want to make an exhaust with both pipes exiting on one side and above the sidecase like a scrambler. any ideas on where to buy some tube with good bends i could peice , or maybe a way to make some good bends with out a good bender? lol

found a deal on 2007 yamaha r6 wheels and forks, anyone know what would need to be done to fit these forks? also im building my own hard tail but with the wider 180mm rear tire and wheel would i need to do anything with the front sprocket to match the wider wheel?

ive been getting the urge to build a bike and finally scraped up some money to get a patient. here she is 79 xs650 plans are to build a custom 4-5" stretch drop seat hardtail, a slight rake, sportster tank, make some custom pipes, paint the motor black with polished odds and ends, and possibly...