TX650Jim
XS650 Member
Hi all,
Before you all groan and say this has been done to death, please just take a deep breath and see if you can help me out.
I have made a start fitting the kit following the instructions provided but find them a bit misleading, there is no instructions on what to do with your current wiring, only how to connect up your new kit.
I will upload some pics and see if you can advise,... I have on the left side a grey and orange wire still hooked up to the black wires coming from the condenser, they both originally had the corresponding Orange and grey wires from the points stator also connected to them.
On the right side I had written labels indicating where the wires had come from, again both grey and orange wires, the grey one coming from the loom marked as connected to right hand coil to the orange wire. The other loose orange one, also from the loom marked as connected to the left hand coil with an orange connection wired.
If you are now confused, join the club.
If we can sort that bit out 1st I’ll move onto the next dilemma. I wondered if the Condenser still performs any function with the new setup, If not, should these wires just be blanked off or connected together?
There is no instruction on this so thought it best to ask rather than fry something.
Jim
Before you all groan and say this has been done to death, please just take a deep breath and see if you can help me out.
I have made a start fitting the kit following the instructions provided but find them a bit misleading, there is no instructions on what to do with your current wiring, only how to connect up your new kit.
I will upload some pics and see if you can advise,... I have on the left side a grey and orange wire still hooked up to the black wires coming from the condenser, they both originally had the corresponding Orange and grey wires from the points stator also connected to them.
On the right side I had written labels indicating where the wires had come from, again both grey and orange wires, the grey one coming from the loom marked as connected to right hand coil to the orange wire. The other loose orange one, also from the loom marked as connected to the left hand coil with an orange connection wired.
If you are now confused, join the club.
If we can sort that bit out 1st I’ll move onto the next dilemma. I wondered if the Condenser still performs any function with the new setup, If not, should these wires just be blanked off or connected together?
There is no instruction on this so thought it best to ask rather than fry something.
Jim
Attachments
Last edited: