angus67
Welder's penetrate deeper!!
If i read correctly, permanent magnet alts dont have this issue because they are self enegized.
So this spike is why PAMCO's tend to throw a spark at key off when the engine's not running? Been waiting for a spark with a just right crank position to shove the bike off the side stand to flop on it's side........ I think the standard crank stop is a bit before TDC so it's usually harmless. Any comments about using a diode on a PMA setup?
Would the 6A10 diodes work on the starter relay as well?
If i read correctly, permanent magnet alts dont have this issue because they are self enegized.
...They use a rectangular 0.1uF capacitor that looks like a small match box in series with a resistor (I think 400 Ohms) connected parallel with the inductor...
- I own several!