Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Enjoy XS650.com?Consider making a donation to help support the site. XS650.com receives a small share of sales from some links on this page, but direct donations have a much greater impact on keeping this site going.
The swing arm,and tear fender are stock, the front fender is an aftermarket harley fender. I cut the frame,and layed the rear shocks forward to lower the bike,it makes the swing arm look longer.
It is an after market Fender very similar to a softail custom front fender. I made the side brackets,they bolt into the holes in the fork legs,and then bolt to the fender. I'd send ya a picture but I sold the bike last year! Good luck.
It is an after market Fender very similar to a softail custom front fender. I made the side brackets,they bolt into the holes in the fork legs,and then bolt to the fender. I'd send ya a picture but I sold the bike last year! Good luck.
As I recall,I had to make my own holes in the fender,and I used very small stainless socket head,buttonhead screws. It looked better with the round heads.