Broken Case and Oil Leak

[SpitfireOps]

Replaced the clutch rod seal and still leaked.

Ordered all seals and in taking out countershaft seal found a broken race.

Someone had used silver silicone before and I have silver ThreeBond I could try.

Anyone dealt with this?

JB Weld maybe with new seal in place?
Thanks!

 

[XSLeo]

I might try cleaning it very well, install the seal then build up the broken area with JB Weld. It may be hard to do as the JB Weld is kinda running at first. It may work better if you let the JB Weld dry a bit. Apply in thin coats.
Leo

 

[FB71]

JB also makes a Weld putty