Cam Chain tensioner pivot arm what are torque specs??????

[jonbo30]

I cant find what you should torque the 4 screws that hold the cam chain tensioner pivot arm in place?? thanks jb

 

[TwoManyXS1Bs]

If you're talking about the early `70-`71 four-bolt tensioner body behind the cylinder, held by (4) 6mm bolts, try 7 ft-lbs.

 

[jayel]

in the engine 7 ft lb (6mm torque) be aware the back bolts are longer (14mm), fronts are a special shouldered screw, use blue loc-tite on all of them

 

[jonbo30]

its 79 xs 650 sf. there 2 shorter bolts and 2 longer bolts as long as they dont exceed 14 mm 7ft will work? thanks

 

[jayel]

its 79 xs 650 sf. there 2 shorter bolts and 2 longer bolts as long as they dont exceed 14 mm 7ft will work? thanks

fronts are a special shouldered screw, use blue loc-tite on all of them




--------------------------------------------------------------------------------

 

[jonbo30]

thank you will do

 

[pythonregius24]

Are you guys talking about this?

 

[jonbo30]

yes we are.

 

[darynar1016]

Anybody using any other type of screw for this when their bolt head stripped?
An M6 allen bolt would be perfect but just seeing what others have done.
I know there is a special shoulder but was curious.

Posted via Mobile

 

[Bezz]

Longer shoulder bolts in the back?